HPIPH

Jal Shakti Vibhag

Government of Himachal Pradesh

आदत बनाएं बूंद-बूंद बचाएं
Home / Schemes/Projects / Design Tools – Jal Shakti Vibhag (JSV), Himachal Pradesh (Trial)

Design Tools – Jal Shakti Vibhag (JSV), Himachal Pradesh (Trial) Last Updated : Thu, 05 Nov 2026

Design Tools – Jal Shakti Vibhag (JSV), Himachal Pradesh

Preliminary design aids for rural and urban water supply schemes · BIS codes and CPHEEO Manual

Design Tool-1
Water Supply Scheme

Population forecast, demand, WTP capacity, series / parallel pumping, rising mains, sump wells, MBT, delivery and sector tanks, gravity mains, distribution, pipe thickness and class, RD–RL diagram.

Open Design Tool-1

Design Tool-2
Intake Structures Design

Ground water (tubewell, percolation well, infiltration gallery) and surface water (spring, stream, river, reservoir) intakes · hydrology, levels (LWL / MWL / HFL) · geo-hazard evaluation · structural design and basic drawings · materials · BIS, seismic codes & CPHEEO

Open Design Tool-2

Design Tool-3
Water Treatment Plant (WTP)

Detailed WTP design from Tool-1 flows, raw water quality, component RD / RL, material of construction and soil data.

  • Flow diagram and RD–RL hydraulic profile
  • Capacity of each component
  • Valves, fittings and pumping
  • Structural basis: concrete grade, steel, bearing checks
Open Design Tool-3

Design Tool-4
Rising Main Design and Optimise

L-section (RD / RL) based design of the pumping main: economic diameter, telescoping of pipe type, grade and thickness, hydraulic grade line, pump selection, jointing, air and scour valves, restraints and surge protection, on a life-cycle cost basis.

Open Design Tool-4

Design Tool-5
Sector - DMA/Storage Tank

Capacity and levels, structural design (RCC, steel, pre-fabricated; circular or rectangular), inlet / outlet / scour / siphon overflow, pipes and fittings, automated valves, IoT specification and not-to-scale diagrams.

Open Design Tool-5

Design Tool-6
Distribution & Gravity Main Design, Pipe Economiser and Booster-Pump Optimiser

Feed the RD / RL profile and the delivery points of a gravity, pumped or boosted distribution main (intermittent or 24×7, with a two-end-fed loop option). The tool economises the diameter, material, grade and wall thickness section by section, places booster stations and break-pressure tanks, and checks hydraulic grade, pressure, velocity, surge, valves, meters and leak-detection.

Open Design Tool-6

Design Tool-7
Design Tool-7 – Environmental, Social, Gender, Occupational Health & Safety and QA/QC Protocols

Enter the physical, social and workforce particulars of a water supply scheme. The tool screens the risks and prepares the site-specific Environmental Management Plan, Muck Disposal Plan and clearance checklist; the Social Safeguard Plan, voluntary land donation formats and grievance matrix; the Gender Action Plan, camp sanitation and wage-audit sheet; activity-specific safety SOPs, PPE matrix and emergency response plan; and the stage-wise inspection and test plan, hydro-test logs and BIS 10500 water testing plan.

Open Design Tool-7

Design Tool-8
Cost Estimate of a Water Supply Scheme – Jal Shakti Vibhag, Himachal Pradesh

Follows the JSV "Analysis of Rate" method: lead-wise carriage (truck table and head-load table), material, labour and sundries, water charges, contractor's profit (10 % except cement / steel), overheads (5 %), GST and labour cess in the item rate; flanged-pipe, valve and chamber analyses; a dated basic-rate sheet. Prices all components of Tools 1 to 7, including lump-sum items that need subjective evaluation.

Open Design Tool-8

Workflow: calculate the scheme in Tool-1, press “Export WTP data for Tool-3”, then open Tool-3 and use “Import from Tool-1”. These tools are preliminary design aids; final designs must be prepared and approved by the competent engineer.